Artesyn Centellis 4410 (AXP-1410) Installation and Use (July 2014) - Manual (Page 143)

Supported IPMI Commands
AXP 1410 Installation and Use (6806800H70L) 143
6.3 PICMG 3.0 Commands
The Artesyn IPMC is a fully compliant AdvancedTCA Intelligent Platform Management
Controller. For example, it supports all required and mandatory AdvancedTCA commands as
defined in the PICMG 3.0 specification.
Table 6-5 Supported PICMG 3.0 Commands
Command NetFn Rq/Rs CMD PEMs FTMs
Get PICMG Properties 0x2C/0x2D 0x00 X X
Get Address Info 0x2C/0x2D 0x01 X X
FRU Control 0x2C/0x2D 0x04 X X
Get FRU LED Properties 0x2C/0x2D 0x05 X X
Get LED Color Capabilities 0x2C/0x2D 0x06 X X
Set FRU LED State 0x2C/0x2D 0x07 X X
Get FRU LED State 0x2C/0x2D 0x08 X X
Set IPMB State 0x2C/0x2D 0x09 X X
Set FRU Activation Policy 0x2C/0x2D 0x0A X X
Get FRU Activation Policy 0x2C/0x2D 0x0B X X
Set FRU Activation 0x2C/0x2D 0x0C X X
Get Device Locator Record ID 0x2C/0x2D 0x0D X X
Compute Power Properties 0x2C/0x2D 0x10 X X
Set Power Level 0x2C/0x2D 0x11 X X
Get Power Level 0x2C/0x2D 0x12 X X
Get Fan Speed Properties 0x2C/0x2D 0x14 X
Set Fan Level 0x2C/0x2D 0x15 X
Get Fan Level 0x2C/0x2D 0x16 X
Set FRU Extracted 0x2C/0x2D 0x3A X X