Artesyn Centellis 4410 (AXP-1410) Installation and Use (July 2014) - Manual (Page 175)

FRU Information and Sensor Data Records
AXP 1410 Installation and Use (6806800H70L) 175
7.3.5 Power Entry Module Analog Sensors
The analog sensors available on the PEM can be divided into the following three categories:
 Voltage Sensors
 Current Sensors
 Temperature Sensor
6 CB 1 Status Circuit Breaker fuse state OEM-
reserved Always
7 CB 2 Status Circuit Breaker fuse state OEM-
reserved Always
8 FUSE 1 Status Hardware fuse OEM-
reserved Always
9 FUSE 2 Status Hardware fuse OEM-
reserved Always
10 FUSE 3 Status Hardware fuse OEM-
reserved Always
11 FUSE 4 Status Hardware fuse Analog Always
12 LM73 Temp Temperature Analog Always
13 48.0V FEED_1 Voltage Analog Always
14 48.0V FEED_2 Voltage Analog Always
15 PEM LFC Status Management
Subsystem
Shelf
16 Current
Measure1 Current Analog Always
17 Current
Measure2 Current Analog Always
Table 7-36 IPMI Sensors on the PEM (continued)
Sensor
No.
Sensor Name
Type of
Measurement
What does it measure? Sensor Type Availability