Artesyn ATCA-7365 Installation and Use (November 2014) - Manual (Page 78)

Controls, Indicators, and Connectors
ATCA-7365 Installation and Use (6806800K65N) 78
3.2.2 Keys
The blade provides one face plate reset key.
On pressing it, a hard reset is triggered and all attached on-board devices are reset.
H/S FRU State Machine
During blade installation:
Permanently blue: On-board IPMC powers up
Blinking blue: Blade communicates with shelf manager
OFF: Blade is active
During blade removal:
Blinking blue: Blade notifies shelf manager of its desire to deactivate
Permanently blue: Blade is ready to be extracted
Table 3-1 Face Plate LEDs (continued)
LED Description
Figure 3-5 Location of Face Plate Reset Key
You cannot reset the IPMC via this key.