Artesyn ATCA-7365 Installation and Use (November 2014) - Manual (Page 134)

BIOS
ATCA-7365 Installation and Use (6806800K65N) 134
Memory (0Ch) Offset 00h Correctable ECC
Offset 01h Uncorrectable ECC
Offset 04h Memory Device Disabled
Offset 05h Correctable ECC error logging limit reached
Offset 06h Presence detected
Offset 07h Configuration Error (Out of order)
Event Data3:
Bit Description
------------------------------------------------------------------
0-3 DIMM number 1..12
Fh DIMM number unknown
4 DIMM number per Channel 0..1
5-6 DIMM channel 0..2
7 CPU Socket 0..1
Critical Interrupt
(13h) Offset 04h PCI PERR
Offset 05h PCI SERR
Event Data2: Bus number
Event Data 3:
Bit Description
----------------------------------------------------------------
0-3 PCI Function number
4-7 PCI Device number
Boot Error (1Eh) Offset 00h No bootable media (no boot device found)
Battery (29h) Offset 01h Battery failed
System Firmware
Progress (0Fh) Offset 00h System Firmware Error
Supported Event Data3:
70h Front Panel Network not detected
78h Base Network not detected
79h Base Network reduced PCI performance
7Ah Base Network Device Error
80h Fabric Network not detected
81h Fabric Network reduced PCI performance
82h Fabric Network Device Error
88h Update Channel Network not detected
89h Update Channel Network reduced PCI performance
8Ah Update Channel Network Device Error
90h Reboot after a FRB2 Watchdog Timeout
91h Reboot after a BIOS/POST Watchdog Timeout
92h Reboot after a OS Load Watchdog Timeout
93h Reboot after a SMS/OS Watchdog Timeout
94h Reboot after a OEM Watchdog Timeout
Table 4-30 BIOS Supported IPMI Events (continued)
Sensor Event