10 advanced -> runtime error logging, 11 advanced -> smbios event log, Table 4-18 – Artesyn ATCA-7365 Installation and Use (November 2014) User Manual
Page 118: Advanced -> runtime error logging, Table 4-19, Smbios event log -> smbios event log settings, Bios
BIOS
ATCA-7365 Installation and Use (6806800K65N)
118
4.5.2.10 Advanced -> Runtime Error Logging
The following table contains description about the options that can be configured for Runtime
Error Logging.
Also, refer to
.
4.5.2.11 Advanced -> SMBIOS Event Log
4.5.2.11.1 Advanced -> SMBIOS Event Log -> SMBIOS Event Log Settings
The following table contains description about the options that can be configured for MBIOS
Event Log Settings.
Also, refer to
.
Table 4-18 Advanced -> Runtime Error Logging
Item
Values
Description
Runtime Error
Logging
Enabled (Default)
Disabled
Enable/Disable Runtime Error Logging Support.
Events are sent to SMBIOS error log and IPMI SEL.
PCI Error Logging Enabled (Default)
Disabled
Enable/Disable PCI Error Logging.
Error Threshold
1…1000,
Default 10
Memory Correctable Error Threshold value.
Range [1..1000] Default 10.
Error Logging Limit 1…20
Default 10
Memory Correctable Error Logging Limit value.
Range [1..20] Default 10.
Table 4-19 SMBIOS Event Log -> SMBIOS Event Log Settings
Item
Values
Description
SMBIOS Event
Log
Enabled (Default)
Disabled
Change this to enable or disable all features of
SMBIOS Event Logging during boot.
Erase Event Log No (Default),
Yes On next reset, Yes On
every reset
Choose options for erasing SMBIOS Event Log.
Erasing is done prior to any logging activation
during reset.