Artesyn ATCA-7365 Installation and Use (November 2014) - Manual (Page 62)

Hardware Preparation and Installation
ATCA-7365 Installation and Use (6806800K65N) 62
Installation Procedure
To install a DIMM module:
1. Remove the blade from system as described in Installing and Removing the Blade on
page 66 .
2. Open the locks of memory module socket.
3. Press the module carefully into the socket.
As soon as the memory module has been fully inserted, the locks automatically
close.
4. If applicable, repeat steps 2 to 3 to install further modules.
Damage of Circuits
Electrostatic discharge and incorrect module installation and removal can damage circuits
or shorten their life.
Before touching the module or electronic components, make sure that you are working in
an ESD-safe environment.
Damage of Circuits
Electrostatic discharge and incorrect module installation and removal can damage circuits
or shorten their life.
Before touching the module or electronic components, make sure that you are working in
an ESD-safe environment.