Artesyn ATCA-7365 Installation and Use (November 2014) - Manual (Page 138)

BIOS
ATCA-7365 Installation and Use (6806800K65N) 138
Table 4-36 Result First DWORD supported POST Errors
Bit Description
3 CMOS RAM Battery Failure. Battery is bad, removed or replaced.
9 Keyboard Not Functional. No console input device found or device error.
12 Memory Decreased in Size. DIMM errors during memory initialization found.
Failed DIMM disabled.
18 RTC Time Not Set. Found invalid Date/Time. Date/Time reset to a valid default
value.
8 OEM: IPMI failure
29 OEM: IPMI Boot Parameter read/write error
30 OEM: IPMI Boot Parameter checksum error
31 OEM: IPMI Boot Parameter locked
Table 4-37 Result Second DWORD supported POST Errors
Bit Description
0 OEM: Unspecified error
1 OEM: North Bridge error
2 OEM: CPU error. This bit will be set additionally when a SMBIOS CPU Failure event
is logged.
3 Front Panel Network Error
4 Base Network Error
5 Fabric Network Error
6 Update Channel Network Error
7 PCI Memory Conflict
17 Static Resource Conflict. For example, No Space for OPROM
19 System Board Device Resource Conflict
20 Primary Output Device Not Found
24 NVRAM Data Invalid. Flash write error