20 enable module site command, 21 disable module site command, Table 8-45 – Artesyn ATCA-7365 Installation and Use (November 2014) User Manual
Page 273: Enable module site command description, Table 8-46, Disable module site command description, Supported ipmi commands
Supported IPMI Commands
ATCA-7365 Installation and Use (6806800K65N)
273
8.4.20 Enable Module Site Command
The Enable Module Site command is used to enable a module site.
8.4.21 Disable Module Site Command
The Disable Module Site command is used to disable a module site. If a module site is disabled,
the IPMC firmware ignores the module inserted and acts as if the module is not present.
Table 8-45 Enable Module Site Command Description
Type Byte
Data
Field
Request Data
1:3
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4
Module Site ID
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
Table 8-46 Disable Module Site Command Description
Type Byte
Data
Field
Request Data
1:3
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4
Module Site ID
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00