12 advanced -> local ipmi system event log, 13 advanced -> whea configuration, Table 4-20 – Artesyn ATCA-7365 Installation and Use (November 2014) User Manual
Page 119: Advanced -> local ipmi system event log, Table 4-21, Advanced -> whea configuration, Bios
BIOS
ATCA-7365 Installation and Use (6806800K65N)
119
4.5.2.12 Advanced -> Local IPMI System Event Log
The following table contains description about the options that can be configured for Local
IPMI System Event Log.
4.5.2.13 Advanced -> WHEA Configuration
The following table contains description about the options that can be configured for Serial
Port Console Redirection.
When Log is Full Do Nothing (Default),
Erase Immediately
Choose options for reactions to a full SMBIOS Event
Log. This option does not take effect until the
computer is restarted.
Log EFI OEM
Errors
Enabled (Default)
Disabled
Enable or disable the logging of EFI Error Codes as
OEM Codes.
Convert OEM
Codes
Enabled (Default)
Disabled
Enable or disable the converting of EFI Error Codes
to Standard SMBIOS Types. EFI Errors which cannot
be translated are logged as SMBIOS Post Errors.
Inject Errors
Enabled
Disabled (Default)
Inject Errors before booting a OS: Following errors
are injected: No Console found, IPMI Boot
Parameter Checksum error, CPU Self test failure,
Bad Battery.
Table 4-19 SMBIOS Event Log -> SMBIOS Event Log Settings (continued)
Item
Values
Description
Table 4-20 Advanced -> Local IPMI System Event Log
Item
Values
Description
Erase Local SEL No (Default),
Yes on next reset, Yes on
every reset
Choose options for erasing local SEL.
This option does not take effect until the
computer is restarted.
Table 4-21 Advanced -> WHEA Configuration
Item
Values
Description
WHEA Support
Enable,
Disable (Default)
Enable or disable support for Windows Hardware
Error Architecture.