Artesyn ATCA-7365 Installation and Use (November 2014) - Manual (Page 146)

BIOS
ATCA-7365 Installation and Use (6806800K65N) 146
0x5 OEM initialization before microcode loading
0x6 Microcode loading
0x7 AP initialization after microcode loading
0x8 North Bridge initialization after microcode loading
0x9 South Bridge initialization after microcode loading
0xA OEM initialization after microcode loading
0xB Cache initialization
SEC Error Codes
0xC – 0xD Reserved for future AMI SEC error codes
0xE Microcode not found
0xF Microcode not loaded
Table 4-55 PEI Status Codes
Status Code Description
Progress Codes
0x10 PEI Core is started
0x15 Pre-memory North Bridge initialization is started
0x19 Pre-memory South Bridge initialization is started
0x2F Memory initialization (other)
0x31 Memory Installed
0x32 CPU post-memory initialization is started
0x33 CPU post-memory initialization. Cache initialization
0x34 CPU post-memory initialization. Application Processor(s)
(AP) initialization
0x35 CPU post-memory initialization. Boot Strap Processor
(BSP) selection
0x36 CPU post-memory initialization. System Management
Mode (SMM) initialization)
Table 4-54 SEC Status Codes (continued)
Status Code Description