Artesyn ATCA-7365 Installation and Use (November 2014) - Manual (Page 144)

BIOS
ATCA-7365 Installation and Use (6806800K65N) 144
4.13 BIOS Status Codes
The following tables list the BIOS status codes applicable to the used AMI UEFI BIOS. The BIOS
status codes are written to the blade's I/O Port 80 register and can be obtained by reading the
"POST code" on-board IPMI sensor. The reading of the "POST code" sensor is only valid when the
board is in the BIOS phase. The reading can be used to locate the cause of a board hang during
BIOS phase. When the board has booted a OS, the reading of the '"POST code" sensor returns
no valid status code.
800Dh North Bridge Error
Table 4-52 SubClass EFI_COMPUTING_UNIT_FIRMWARE_PROCESSOR (02h) (IPMI)
Operation Code Description
8100h IPMI Boot Parameter USER area read error
8101h IPMI Boot Parameter DEFAULT area read error
8102h IPMI Boot Parameter USER area write error
8103h IPMI Boot Parameter DEFAULT area write error
8104h IPMI Boot Parameter USER area checksum error
8105h IPMI Boot Parameter DEFAULT area checksum error
8106h IPMI Boot Parameter USER area locked
8107h IPMI Boot Parameter DEFAULT area locked
Table 4-51 SubClass EFI_COMPUTING_UNIT_CHIPSET (06h) (continued)
Operation Code Description