5 advanced -> sata configuration, Table 4-11, Chipset - south bridge -> usb configuration – Artesyn ATCA-7365 Installation and Use (November 2014) User Manual
Page 113: Table 4-12, Advanced -> sata configuration, Bios
BIOS
ATCA-7365 Installation and Use (6806800K65N)
113
4.5.2.4.1 Advanced -> Chipset - South Bridge -> USB Configuration
The following table contains description about the options that can be configured for USB
Configuration under Chipset - South Bridge.
4.5.2.5
Advanced -> SATA Configuration
The following table contains description about the options that can be configured for SATA
Configuration.
Table 4-11 Chipset - South Bridge -> USB Configuration
Item
Values
Description
All USB Devices
Enabled (Default)
Disabled
Enable/Disable All USB devices.
USB 2.0(EHCI) Support Enabled (Default)
Disabled
Enable/Disable USB 2.0 (EHCI) Support.
Front Panel USB
Enabled (Default)
Disabled
Enable/Disable Front Panel USB.
Onboard USB Flash Disk Enabled (Default)
Disabled
Enable/Disable Onboard USB FlashDisk.
ARTM USB
Enabled (Default)
Disabled
Enable/Disable USB on ARTM.
Table 4-12 Advanced -> SATA Configuration
Item
Values
Description
SATA Mode
Disable, IDE Mode
(Default), AHCI Mode,
RAID Mode
Select the SATA Mode.
Disable: Disable the SATA controller
IDE Mode: SATA controller works in IDE
compatible mode.
AHCI Mode: STATA controller works in AHCI
Mode
RAID Mode: STATA controller works in RAID
Mode, Additionally a SATA RAID Option ROM is
loaded.