3 iscsi setup for base and fabric ethernet, Figure 4-4, Option rom execution – Artesyn ATCA-7365 Installation and Use (November 2014) User Manual
Page 102
BIOS
ATCA-7365 Installation and Use (6806800K65N)
102
4.4.3
iSCSI Setup for Base and Fabric Ethernet
The board supports boot from iSCSI block devices connected to Base or Fabric Ethernet. To
enable the iSCSI boot, select the iSCSI item of Fabric Network Boot setup question from Boot -
> Option ROM Execution screen.
If the selected device does not load the Operating System, BIOS resets the board and reverts
to the previous boot sequence.
Figure 4-4
Option ROM Execution
This manual is related to the following products: