Maps and registers – Artesyn ATCA-7365 Installation and Use (November 2014) User Manual
Page 213
Maps and Registers
ATCA-7365 Installation and Use (6806800K65N)
213
LM75_INT_
Interrupt input from payload Temp sensor
0x24
SFMEM_IRQ_
Interrupt from SFMEM Module
0x25
THERM_SEN0
IRQ request from 82599 Thermsen0
0x26
THERM_SEN1
IRQ request from 82599 Thermsen1
0x27
THERM_ALERT_
IRQ request from IOH Thermo-sensor
0x28
APB_ALARM
A 48V input alarm (low voltage, etc)
0x29
RTM_SPI_MISO
RTM interrupt sources
0x2A
CPU0_PRCHT_ CPU0
“Processor hot” interrupt
0x2B
CPU1_PRCHT_ CPU1
“Processor hot” interrupt
0x2C
Telecom Status/Control
Register
Active when at least one Status bit (bit 0, 1 or
2) is set
0x2D
Table 6-62 Address Map of Interrupt Mask and Map Registers (continued)
Interrupt Source
Description
Address Offset of
Interrupt Mask
This manual is related to the following products: