Artesyn ATCA-7365 Installation and Use (November 2014) - Manual (Page 115)

BIOS
ATCA-7365 Installation and Use (6806800K65N) 115
4.5.2.7 Advanced -> Super IO Configuration
4.5.2.7.1 Advanced -> Super IO Configuration -> Serial Port 0 Configuration
The following table contains description about the options that can be configured for Serial
Port 0 Configuration.
USB Device Name Auto, Floppy, Forced
FDD, Hard Disk, CD-
ROM
Mass storage device emulation type.
"Auto" enumerates devices according to its
media format. Devices less than 530 MB are
detected as floppy. Optical drives are emulated
as CD-ROM. Drives with no media will be
emulated according to a drive type.
Forced FDD option can be used to force HDD
formatted drive to boot as FDD (For example,
ZIP drive).
Table 4-13 Advanced -> USB Configuration (continued)
Item Values Description
Table 4-14 Super IO Configuration -> Serial Port 0 Configuration
Item Values Description
Serial Port Enabled (Default)
Disabled Enable or disable Serial Port (COM 0).
Change Settings Auto,
IO=3F8h IRQ=4 (Default),
IO=3F8h IRQ=3,4,5,6,7,10,11,12,
IO=2F8h IRQ=3,4,5,6,7,10,11,12,
IO=3E8h IRQ=3,4,5,6,7,10,11,12,
IO=2E8h IRQ=3,4,5,6,7,10,11,12
Select IO port and Interrupt settings for
COM 0.