Echelon NodeBuilder FX - Manual (Page 12)

xii Preface
• Debugging a Neuron C Application. Describes how the use the NodeBuilder debugger to
troubleshoot your Neuron C application.
• Appendices. Provides information for using the command line project make facility and managing
a NodeBuilder project using a source control application. Includes a glossary with definitions for
many terms commonly used with NodeBuilder device development, and it includes the
NodeBuilder Software License agreement.
Note: Screenshots in this document were taken during the development of the NodeBuilder FX tool;
therefore, some images may vary slightly from the release version of the user interface.
Related Manuals
The documentation related to the NodeBuilder tool is provided as Adobe ® PDF files and online help
files. The PDF files are installed in the Echelon NodeBuilder program folder when you install the
NodeBuilder tool. You can download the latest NodeBuilder documentation, including the latest
version of this guide, from Echelon’s Web site at
www.echelon.com/docs .
The following manuals provide supplemental information to the material in this guide. You can
download these documents from Echelon’s Web site at
www.echelon.com .
FT 5000 EVB Examples Guide Describes how to run the Neuron C example applications
included with the NodeBuilder FX/FT Development tool on an
FT 5000 EVB.
FT 5000 EVB Hardware Guide Describes how to connect the FT 5000 EVBs, and describes the
Neuron core, I/O devices, service pin and reset buttons and
LEDs, and jumper settings on the FT 5000 EVB hardware.
One or two FT 5000 EVBs are included with the NodeBuilder
FX/FT Development Tool.
Gizmo 4 User’s Guide Describes how to use the I/O devices on the Gizmo 4 I/O Board,
and how to use the Gizmo 4 I/O Board to build your own I/O
hardware.
The Gizmo 4 I/O Board is included with the NodeBuilder FX/PL
Development Tool.
Introduction to the L ON W ORKS
®
Platform
Provides a high-level introduction to L ON W ORKS networks and
the tools and components that are used for developing, installing,
operating, and maintaining them.
LNS ® Plug-in Programmer’s Guide Describes how to write plug-ins using .NET programming
languages such as C# and Visual Basic .NET
LonMaker ® User’s Guide Describes how to use the LonMaker Integration Tool to design,
commission, modify, and maintain L
ON W ORKS networks.
L ON M ARK
® SNVT and SCPT Guide Documents the standard network variable types (SNVTs),
standard configuration property types (SCPTs), and standard
enumeration types that you can declare in your applications.
LonScanner™ Protocol Analyzer
User’s Guide Describes how to use the LonScanner Protocol Analyzer to
monitor, analyze, and diagnose ISO/IEC 14908-4,
L
ON W ORKS /IP, and native ISO/IEC 14908-1 channels, and how
to interpret the data that the protocol analyzer collects.