Toa M-864D Ver.2.2.0 - Manual (Page 99)

99
11.2. fader Settings
Enable/Disable settings for all fader types of each channel.
This setting item is related to the system.
Faders set to “Disable” are fixed at 0 dB gain.
Select [Config Fader] from the Menu view to display the Fader Settings screen.
(1) Monaural input fader settings
(2) Stereo input fader settings
(5) Channel information
(7) Enable/Disable Settings button
(8) Global Disable Settings button
(6) Enable/Disable fader settings
(FRONT, PC VOL. and EXT VOL. from the left)
(6) Enable/Disable fader settings
(REC OUT VOL.)
(3) Monaural output fader settings
(4) Recording output fader settings
To disable fader-operated gain changes, set the corresponding fader to “Disable.” (Faders set to “Disable” are
fixed at 0 dB gain.) Disabled faders are not displayed on the screen.
1. Monaural Input fader Settings
Fader settings of each monaural input channel are
displayed.
2. Stereo Input fader Settings
Fader settings of each stereo input channel are
displayed.
3. Monaural output fader Settings
Fader settings of each monaural output channel
are displayed.
4. recording output fader Settings
Fader settings of each recording output channel
are displayed.