Toa M-864D Ver.2.2.0 - Manual (Page 127)

127
[attenuator setting]
Setting Item Setting Range Default Setting Remarks Online Setting Storable in
Preset Memory
ATT
Mono Output:
–42 to 0 (dB),
6 dB steps
Recording Output:
–36 to 0 (dB),
6 dB steps
0
14.2.4. external control settings
[Contact input]
Setting Item Setting Range Default Setting Remarks Online Setting Storable in
Preset Memory
None – –
Channel On/Off
Position: Mono Input,
ST Input, Mono
Output, Rec Out
Channel/Contact:
1 – 8, L/R (Settable
number depends on
channel kind)
Control: Make, Pulse
Mono Input 1,
Make
EXT VOL. Gain Up/
Down
Position: Mono Input,
ST Input, Mono
Output, Rec Out
Channel/Contact:
1 – 8, L/R (Settable
number depends on
channel kind)
Mono Input 1
Gain, 1 dB
Up/Down
ST Line Source Select Position: ST1, ST2
Parameter: A, B, C
ST1, A
Preset Memory Load Preset No.: 1 – 16
The same number
as terminal number
Remote Command Command No.:1 – 32
The same number
as terminal number
[Contact output]
Setting Item Setting Range Default Setting Remarks Online Setting Storable in
Preset Memory
Break – –
Make – –
Channel On/Off
Position: Mono Input,
ST Input, Mono
Output, Rec Out
Channel/Contact: 1
– 8 (Settable number
depends on channel kind)
Mono Input 1
ST Line Source Select Position: ST1, ST2
Parameter: A, B, C
ST1, A
Preset Memory Load Preset No.: 1 – 16
The same number
as terminal number
Contact Through Out
Contact Input No.:
1 – 8
1
Remote Switched Out Output Control Signal:
Momentary, Latch
Momentary
Fader Tally
Position: Mono Input,
ST Input, Mono
Output
Channel/Contact: 1
– 8 (Settable number
depends on channel kind)
Control: Make, Pulse
Mono Input 1,
Make
Threshold Value:
“1” Fader Scale
(About –60 dB)
Fixed