Toa M-864D Ver.2.2.0 - Manual (Page 48)

48
7.2. trim
This is a function box for the stereo input function and is used to set the MIX ALL/SELECT mode, ON/OFF
statuses and names of each of input sources A, B and C, and gains.
(1) MIX ALL Mode
(2) SELECT Mode
(3) A/B/C Source Control (4) ON/OFF
(5) Name
(6) Trim Control
Control Details for sources A, B and C
1. MIx/aLL Mode
Clicking this button sets it to MIX ALL mode and
illuminates the display in orange. In MIX ALL
mode, the signal levels of Sources A, B and C are
adjusted with their respective trim gains, and then
mixed together.
Note
Input sources set to OFF in the “ON/OFF” settings
are not mixed.
2. SeLeCt Mode
Clicking this button sets it to SELECT mode and
illuminates the display in orange. In SELECT mode,
only one of Sources A, B and C is selectable.
3. a/B/C Source Control
Sets Source A/B/C’s “ON/OFF,” “Name” and “Trim
Gain.”
4. oN/off
Sets the ON/OFF status of input sources A, B and
C. In the SELECT mode, only one of Sources A,
B, and C can be set to ON. Also, all three sources
cannot be simultaneously set to OFF (one must
always be ON).
The display is illuminated in orange if set to ON,
and in blue if set to OFF.
5. Name
Sets the names of input sources A, B and C. Each
name can be entered if clicked.
6. trim Control
Sets the trim gain, which can be reduced by clicking
on the downward-pointing triangle and increased
by clicking on the upward-pointing triangle.
Clicking the gain indication in the center opens the
diagram for trim gain entry.
Trim gain settings can be changed by dragging the
vicinity of the GUI’s center of the volume control.