Toa M-864D Ver.2.2.0 - Manual (Page 63)

63
7.9. PeQ
This function box for monaural outputs is used to compensate for each output’s frequency characteristics with
a 5-point parametric equalizer.
(1) Filter control field (2) Filter point , (3) Filter point initial value
Filter point control
Filter point No.
(4) Frequency control
(8) Lock button (9) Resolution button (10) Q indicator button(11) Grouping button
(5) Gain control
(6) Q control
(7) ON/OFF button
1. filter Control field
PEQ frequency characteristics are displayed by a
graph.
Each filter can be set by dragging its corresponding
filter point.
2. filter Point
Filter points are indicated by five yellow circles
within the filter control field. Frequencies and gains
can be changed by dragging the filter points.
3. filter point initial value (right-click menu)
The setting value of each point can be initialized by
selecting the “Point Clear” from the menu displayed
when you right-click on the filter point on a graph.
4. frequency Control
Sets each filter point’s frequency.
The downward pointing triangle button decreases
the frequency and the upward pointing triangle
button increases the frequency.
Clicking the frequency indication in the center
opens the dialog for frequency entry.
5. Gain Control
Sets each filter point’s gain.
The downward pointing triangle button reduces
the gain and the upward pointing triangle button
increases the gain.
Clicking the gain indication in the center opens the
dialog for gain entry.
6. Q Control
Sets each filter point’s Q.
The downward pointing triangle button reduces Q
and the upward pointing triangle button increases
Q. Clicking the Q indication in the center opens the
dialog for Q selection.