Toa M-864D Ver.2.2.0 - Manual (Page 31)

31
[Gain]
Statuses of the phantom power ON/OFF, PAD, low-cut filter and gain are displayed.
(1) Phantom power (3) Low-cur filter
(2) PAD (4) Gain
1. Phantom Power
Displayed in orange when the phantom power is
ON, and in black when the phantom power is OFF.
2. PaD
Displayed in orange when PAD is ON, and in black
when PAD is OFF.
3. Low-Cut filter
Displayed as shown in the figure above when the
low-cut filter is ON, and as shown in the figure
below when the filter is OFF.
4. Gain
Displays gain values.
The following display shows the phantom power is OFF, PAD is ON and low-cut filter is OFF, gain is 0 dB:
For gain settings, see p. 47 , “Function Box.”
[tone]
Roughly displays the frequency characteristics curve set with the tone control.
Frequency characteristics are indicated by a flat straight line when BASS, MID and TREBLE gains are all set
to 0 dB.
For tone settings, see p. 52 , “Function Box.”
[fBS]
Roughly displays the frequency characteristics curve of the Feedback Suppressor (FBS) filter.
For FBS settings, see p. 54 , “Function Box.”