Toa M-864D Ver.2.2.0 - Manual (Page 35)

35
[trim]
Displays MIX ALL/SELECT mode, and ON/OFF status of A, B and C inputs.
Input A ON/OFF status Input B ON/OFF status
Mode (MIX ALL or SELECT)
Input C ON/OFF status
Note: Inputs A, B and C are displayed in orange when ON and black when OFF.
Status is displayed as shown in the following figure when in SELECT mode.
Note: This display shows that Input C is selected.
For trim settings, see p. 48 , “Function Box.”
[tone]
Roughly displays the frequency characteristics curve set with the tone control.
Frequency characteristics are indicated by a flat straight line when BASS, MID and TREBLE gains are all set
to 0 dB.
For tone settings, see p. 52 , “Function Box.”
[auto-Mute]
Displays the Auto-Mute ON/OFF status for output channels 1 – 4.
Orange indicates ON and gray indicates OFF.
(In the figure below, outputs 1 and 2 are ON, and outputs 3 and 4 are OFF.)
Note: ON/OFF settings here have nothing to do with output assignment.
Use the matrix function boxes for output signal assignment (see p. 59 ).
Note: Auto-Mute ON/OFF settings for both L and R stereo channels are interlocked.
For Auto-Mute ON/OFF settings, see p. 57 , “Function Box.”