Toa M-864D Ver.2.2.0 - Manual (Page 49)

49
7.3. fader
This function box is for monaural input, stereo input, monaural output and recording output.
• Fader Type and Name
Fader Type Fader Name Remarks
FRONT FADER FRONT fader Fader on the unit’s front panel
PC VOL. PC VOL. fader PC software and external control protocol
EXT VOL. EXT VOL. fader ZM Remote controller and contact control
REC OUT VOL. REC OUT VOL. fader Volume control on the unit’s front panel
• Disabling the Fader
To disable gain changes made with fader operation, set the corresponding fader to “Disable” in the Fader
Settings on p. 99 .
(Faders set to “Disable” are fixed at 0 dB gain.)
Faders set to “Disable” are not displayed.
[Monaural input, Stereo input and Monaural output]
(1) Channel name
(2) Channel ON/OFF button
(7) PC VOL. grouping number
(3) Fader box total gain
(8) EXT VOL. grouping number
(4) FRONT fader gain
(9) EXT VOL. bypass settings
(5) PC VOL. gain
(10) EXT VOL. gain
(6) FRONT fader
(11) EXT VOL. fader
(12) PC VOL. fader
Note
This fader is displayed in
online mode as shown at
right when the fader is set
to “Enable” in the Fader
Settings on p. 99 .