Toa M-864D Ver.2.2.0 - Manual (Page 45)

45
[Channel name]
Displays the channel name.
[Level meter]
Indicates the signal level with a bar graph.
The post-gain processing level is displayed for the monaural input, and the post-Trim processing level for the
stereo input, and the pre-attenuator processing level for both monaural and recording outputs.
6.4. Contact Monitor View
Monitors the unit’s contact input and output statuses. Only displayed while in online mode.
Displays the functions allocated to each contact terminal and terminal status.
Function allocated to the contact input terminal
Function allocated to the contact output terminal
Contact No. Contact No.
Contact input terminal status
Contact output terminal status
Break contact is displayed in black, and make contact is displayed in yellow.
Break:
Make:
For function allocations to each contact input and output, see p. 81, “REMOTE SETTINGS.”
Channel kind Mono In, Stereo In,
Mono Out
Rec Out
Signal level +18 dB to Peak: Red +4 dB to Peak: Red
+6 to +18 dB: Yellow −8 to +4 dB: Yellow
Under +6 dB: Green Under −8 dB: Green