Toa M-864D Ver.2.2.0 - Manual (Page 75)

75
9. CoMMUNICatIoN SettINGS
9.1. Connections between a PC and the Unit
Connect a PC and the M-864D to a switching hub using LAN straight cables individually.
M-864D
LAN connection
terminal
PC with the M-864D PC
Software installed
Switching hub
Category 5 or higher shielded
twisted pair straight cable for LAN
(with RJ45 connectors)
9.2. Method to enable Communications between the PC and the Unit
Step 1. Perform network settings by selecting [Network Connection Settings] from the menu.
(See p. 76, “Connection Settings.” )
Step 2. Make Communications by selecting [Network Connect] from the menu.
(See p. 79, “Communications.” )