Toa M-864D Ver.2.2.0 - Manual (Page 13)

13
[Network]
Connect: Connects the unit to a PC for online processing. (See p. 75 .)
Disconnect: Disconnects the unit from a PC for offline processing. (See p. 80 .)
Note
The unit’s setting does not change while in the offline state even if it is changed with
a PC.
Connection Setting: Allows you to perform network settings and to designate the unit’s IP address to
which this software can access.
Auto Connect: Makes an automatic connection when the file is opened next time.
[remote]
Input: Displays the contact input setting dialog. (See p. 82 .)
Output: Displays the contact output setting dialog. (See p. 84 .)
Setting: Displays the ZM Remote controller setting dialog. (See p. 87 .)
Port Setting: Displays the Port Setting screen. (See p. 91 .)
Remote Command: Displays the External Control Command Setting screen. (See p. 92 .)
[Config]
Name: Displays the unit name setting dialog. (See p. 98 .)
Fader: Displays the fader setting dialog. (See p. 99 .)
Lock: Displays the lock setting dialog. (See p. 100 .)
Preset Memory Setting: Displays the preset memory setting dialog. (See p. 102 .)
[option]
Change Safe: Displays the Change Safe Setting dialog. (See p. 105 .)
Security Setting: Sets the user level and the restriction of operations. (See p. 113 .)
Maintenance: Displays the Maintenance window. (See p. 110 .)