Toa M-864D Ver.2.2.0 - Manual (Page 95)

95
[external Command Setting screen (when the Parameters tab is selected)]
(1) Parameter name (2) Data (3) Length (bytes)
1. Parameter name
Enter the parameter name.
Use up to 20 alphanumeric characters for input.
2. Data
Enter the data in hexadecimal notation (2 digits of
0 to 9 and A to F).
ASCII characters cannot be used for entry.
To enter the data name, convert ASCII character to
character code.
Each parameter can be registered using up to 20
bytes in 1-byte units.
3. Length (bytes)
Set the parameter length to be used.
Set the parameters to be used in the command settings.
Up to 120 parameters can be registered.