Toa M-864D Ver.2.2.0 - Manual (Page 91)

91
10.4.2. assigning functions to the volume control
The following functions can be set for the Volume Control on the ZM Remote Controller.
[ext VoL. Gain]
Increases or decreases the specified channel’s EXT VOL. fader gain.
To select the channel, perform settings in the “Channel Kind” column of Parameter 1 and in the “Channel No.”
column of Parameter 2.
Note: This function does not work even if allocated to channels for which the EXT VOL. fader is disabled.
[Matrix Crosspoint Gain]
Increases or reduces the specified matrix crosspoint gain.
To select the crosspoint, perform settings in the “Input Channel” column of Parameter 1 and in the “Output
Channel” column of Parameter 2.
Parameter 1 Parameter 2
Input channel Output channel
Mono In 1 – 8
Mono Out 1 – 4
Stereo In 1 – 2
[ext VoL. GainCS (Channel Select)] (function provided only with the ZM-9014)
Increases or decreases the gain of the specified channel’s EXT VOL. fader.
The channel can be selected with the button to which the same function is assigned.
[Matrix Crosspoint GainCS (Crosspoint Select)] (function provided only with the ZM-9014)
Increases or decreases the gain of the specified Matrix crosspoint.
The crosspoint can be selected with the button to which the same function is assigned.
[when no functions are assigned to the Volume Control]
Select “None” with the Function button.
10.5. external Control Port Setting
Select [Remote Port Setting] from the Menu view to display the Port Setting screen.
This setting item is related to the system.
1. external control port
Set the port number for receiving the external
control commands from the external control device
such as AMX.
Note: For details about the external control, read
the "M-864D External Control Protocol"
included in the supplied CD.
The latest version is made available on the
TOA product data download site
(http://www.toa-products.com/international/).
2. Meter port setting
Indicates the port number for sending level meter
data.
The meter port number is automatically set to
External control port number plus 1.
(1) External control port
(2) Meter port