Toa M-864D Ver.2.2.0 - Manual (Page 97)

97
11. CoNfIGUratIoN SettINGS
This chapter covers the setting of the unit’s name, the names of its inputs and outputs, the enabling/disabling
of its faders, unit operation lock, and Preset Memory names.
[Unit Name Settings]
The names of the unit, its monaural and stereo inputs, monaural and recording outputs, and stereo input
sources can all be set on a single screen.
Note
Stereo input source names can also be set at the corresponding stereo input channel’s trim box.
[fader Settings]
Each fader can be independently enabled or disabled.
Faders set to Disable are fixed at 0 dB gain.
[Unit Lock (System Lock) Setting]
Unit operation can be locked.
If locked, parameters cannot be changed by way of the front panel faders or switches.
The unit’s system lock function can be used to prevent changes in parameter settings through either misoperation
or tampering.
Faders and switches can be selected by type to be locked or unlocked.
Use the unit’s System lock key or the System lock button located in the Connection view to enable the lock
function.
[Preset Memory Settings]
The following items can be set: Preset Memory name, cross-fade time, Preset Memory number load when
power is ON, and Preset Memory interlock.