Toa M-864D Ver.2.2.0 - Manual (Page 74)

74
8.2. Unit View
The unit’s name and IP address are displayed.
(1) Unit Name
(2) Unit IP address
(3) User Level
1. Unit Name
Displays the unit’s name.
2. Unit IP address
The unit’s IP address is displayed. For the unit IP
address, see p. 76 , “Connection Settings” in the
“Communication Settings.”
3. User Level
The user level is displayed. For the user level, see
p. 113, “User Level and Prohibition Settings.”
8.3. Connection View
This view displays the unit’s status.
(1) Unit communication connection
status indication
(2) Unit cooling fan status indication
(3) ZM Remote Controller status
indication
(4) Unit’s system lock button
(5) Remote control status
indication
(6) Local button
1. Unit Communication Connection Status Indication
The status of the unit’s communication connection
is displayed.
: Not connected (Offline mode)
: Connection in progress (Online mode)
2. Unit Cooling fan Status Indication
The status of the unit’s cooling fan is displayed.
: Normal
: Failure
3. ZM remote Controller Status Indication
The ZM Remote Controller’s connection status is
displayed.
: No settings
: Normal
: Failure
4. Unit’s System Lock Button
The status of the lock button on the unit’s front
panel is displayed.
: Locked
: Unlocked
5. remote Control Status Indication
Displays the status that any operation by a PC,
external control, or ZM Remote controller is
enabled.
It is enabled whenever the PC is online with the
unit.
: Remote
6. Local Button
The unit’s local status is displayed. This button
is used to switch between local and non-local
statuses while in Online mode.
: Local
: Unlocal
[Local status]
The unit’s front panel knobs and other controls are
enabled and their values are valid.
[Unlocal status]
The unit’s front panel knobs and other controls are
disabled and their values are invalid. Faders are
set to 0 dB gain (bypassed mode).
Note
The “Cannot confirm” indication is displayed while
in Offline mode.