Toa M-864D Ver.2.2.0 - Manual (Page 98)

98
11.1. Unit Name Settings
Select [Config Name] from the Menu view to display the Name Settings screen.
(1) Unit name
(3) ST Line source name (4) Stereo input channel name
(2) Monaural input channel name
(5) Monaural output channel name
(6) Recording output channel name
1. Unit Name
The unit’s name is displayed.
Click on the button to enter the unit’s name.
2. Monaural Input Channel Name
The name of each monaural input channel is
displayed.
Click on the corresponding button to enter the
channel name.
3. St Line Source Name
The name of each stereo input source is displayed.
Click on the corresponding button to enter the input
source name.
4. Stereo Input Channel Name
The name of each stereo input channel is displayed.
Click on the corresponding button to enter the
channel name.
5. Monaural output Channel Name
The name of each monaural output channel is
displayed.
Click on the corresponding button to enter the
channel name.
6. recording output Channel Name
The name of each recording output is displayed.
Click on the corresponding button to enter the
channel name.
tip: Up to 20 characters can be entered for each name.