Toa M-864D Ver.2.2.0 - Manual (Page 128)

128
[ZM remote controller settings]
Setting Item Setting Range Default Setting Remarks Online Setting Storable in
Preset Memory
None – – Button, Volume
Channel On/Off
Position: Mono Input,
ST Input, Mono
Output, Rec Out
Channel/Contact: 1
– 8 (Settable number
depends on channel
kind)
Mono Input 1 Button
EXT VOL. Gain
Position: Mono Input,
ST Input, Mono
Output, Rec Out
Channel/Contact: 1
– 8 (Settable number
depends on channel
kind)
Mono Input 1
[ZM-9011/9013/
9014]
Button: Gain, 1 dB
Up/Down
[ZM-9012/9014]
Volume: Gain
ST Line Source Select
Input Channel:
ST1, ST2
Source Selection:
A, B, C
ST1, A Button
Matrix Crosspoint
Assign
Input Source:
Mono Input, ST Input
Input Channel:
1 – 8 (Settable
number depends on
input channel kind)
Output Source:
Mono Output
Output Channel:
1 – 4 (Settable
number depends on
output channel kind)
Mono Input 1 to
Mono Output 1
Button
Matrix Crosspoint
Gain
Input Source:
Mono Input, ST Input
Input Channel:
1 – 8 (Settable
number depends on
input channel kind)
Output Source:
Mono Output
Output Channel:
1 – 4 (Settable
number depends on
output channel kind)
Mono Input 1 to
Mono Output 1
[ZM-9011/9013/
9014]
Button: Gain, 1 dB
Up/Down
[ZM-9012/9014]
Volume: Gain
Preset Memory Load Preset No.: 1 – 16
The same number
as button number
Button
Remote Switched Out Contact Out No.: 1 – 8 The same number
as button number
Button
Remote Command Command No.: 1 – 32 The same number
as terminal number Button
EXT VOL. GainCS
Position: Mono Input,
ST Input, Mono
Output, Rec Out
Channel/Contact: 1
– 8 (Settable number
depends on channel
kind)
Mono Input 1
[ZM-9014]
Button: Channel
select
Volume: Gain