Toa M-864D Ver.2.2.0 - Manual (Page 61)

61
7.8. assign
This function box is used for monaural input, stereo input and recording output signal routing.
Notes
• The Assign Function box is displayed in the Operation view, and not displayed in the Flow view.
• The Assign Function box is interlocked with the Matrix Function box.
[Monaural Input and Stereo Input assignments]
(1) Input channel display
(5) Crosspoint gain control
(2) Output channel No.
(3) ON/OFF button
(4) Crosspoint gain display
[recording output assignment]
(2) Output channel No. (3) ON/OFF button
1. Input Channel Display
Displays the monaural or stereo input channel.
2. output Channel Number
Monaural or stereo input assignment:
The channel number to which the input is assigned
is displayed.
Recording output assignment:
The assigned monaural output channel number is
displayed.
3. oN/off Button
Click to select assignment ON or OFF. This button
is displayed in orange when set to ON, and blue
when OFF.
Notes
• ON/OFF settings are interlocked with the Matrix
Function box.
• Two different modes can be used to assign the
stereo input to monaural output 1 or 2: Mono
Assign mode and Stereo Assign mode.
• Mono Assign mode
Stereo inputs L (left) and R (right) are mixed and
assigned.
• Stereo Assign mode
Stereo input “L” (left) is assigned to Monaural
Output 1 and stereo input “R” (right) is assigned
to Monaural Output 2.
Use the Matrix Function box’s Mono assign
selector button (see p. 59 ) to change the
assign mode.
(Only the Mono Assign mode can be used to
assign the stereo input to Monaural Outputs
3 and 4, and the monaural output to recording
output.)