Maxim Integrated 71M6513H Power Meter IC Family Software - Manual (Page 86)

71M651x Software User’s Guide
free ()
returns number of available buffer
bytes U08x *head, U08x *tail, U16
size
U16 serial.c
get_char() gets next character from CLI buffer none U08 io.c
get_char_d() gets next character from CLI buffer U08 idata *d U08 io.c
get_digit()
gets next decimal (or hex) digit from
CLI buffer
U08 idata *d U08 io.c
Get_Event_Vector() returns vector for specified event enum EVENT_ID event
EventVectors
[event]
events.c
get_long()
converts ascii decimal (or hex) long to
binary number
none S32 io.c
get_long_decimal()
converts ascii decimal long to binary
number.
U08 c S32 io.c
get_long_hex()
converts ASCII hexadecimal number
to binary number
none U32 io.c
get_num()
converts ascii decimal (or hex) number
to binary number
none S08 io.c
get_num_decimal()
converts ascii decimal number to
binary number
none S08 io.c
get_num_hex()
converts ascii hexdecimal byte to
binary number
none U08 io.c
get_short()
converts ascii decimal (or hex) short to
binary number
none S16 io.c
get_short_decimal()
converts ascii decimal short to binary
number
none S16 io.c
get_short_hex()
converts ascii hexdecimal short to
binary number
none U16 io.c
htoc()
converts hexadecimal digit to ascii hex
character
U08 c U08 load.c
IICGetBit() gets a bit, used to reset some parts none bit iicdio.c
IICGetBit() gets a bit, used to reset some parts none bit iiceep.c
IICInit()
initializes DIO4/5 as EEPROM
interface
none none iicdio.c
IICInit()
initializes DIO4/5 as EEPROM
interface
none none iiceep.c
IICRead()
receive a counted string of bytes from
an IIC bus unsigned char xdata *pchIn,
unsigned short cnt
none iicdio.c
IICStart() IIC bus's start condition none none iicdio.c
IICStart() IIC bus's start condition none none iiceep.c
IICStop() IIC bus's stop condition none none iicdio.c
IICStop() IIC bus's stop condition none none iiceep.c
IICWrite()
transmits a counted string of bytes to
an IIC bus unsigned char xdata
*pchOut, unsigned short cnt
bit iicdio.c
init_meter() Initializes meter to default values none none defaults.c
labs() returns the absolute value S32 x S332 library.c
latan2() returns the arcTangent S32 sy, S32 sx U32 library.c
Revision 2.4 TERIDIAN Proprietary 86 of 137
© Copyright 2005-2006 TERIDIAN Semiconductor Corporation