Maxim Integrated 71M6513H Power Meter IC Family Software - Manual (Page 35)

71M651x Software User’s Guide
4.6.INSTALLING THE KEIL COMPILER
After inserting the Keil CD-ROM into the CD drive of the PC, the on-screen instructions should be followed to install
the Keil compiler.
For PCs that can only use one type of drive at a time (CD-ROM drive, floppy drive, such as certain laptops),
it is helpful to copy the contents of the floppy labeled “Add-On Disk” to the hard drive of the PC. That way,
drives do not have to be swapped out during the installation.
The installer will display the following screen:
Select Install Products & Updates
Select C51 Compiler and Tools
Follow the on-screen instructions of the installation program. When prompted for the add-on disk, insert the disk in the
floppy drive and click Next or browse to the location of the files (if they were previously copied to the hard drive of the
PC) by clicking Browse.
Revision 2.4 TERIDIAN Proprietary 35 of 137
© Copyright 2005-2006 TERIDIAN Semiconductor Corporation