Maxim Integrated 71M6513H Power Meter IC Family Software - Manual (Page 37)

71M651x Software User’s Guide
4.7.2. Adjusting the Keil Compiler Settings
Once, the Keil compiler is installed, the most convenient method to start the project is to double-click on the file
651X_demo.UV2. This will start the Keil compiler with the proper settings stored in the 651X_demo.UV2 file.
Directory structures and drive names vary from PC to PC. The settings for the compiler can be adjusted using the
following method:
1. Select “target1” in the leftmost window.
2. Select “project” from the top menu and then select “options for target 1”.
3. Select the “C51” tab.
4. Click the button right next to the “Include Paths” window. Three paths will be listed, pointing to meter
projects, meter projects\demo, and meter projects\demo\header files.
5. If necessary, delete these path entries (X button) and replace them with the corresponding path
entries for your PC ( button).
The dialog box should look like shown below. After making the necessary changes, the project file (651X_demo.UV2)
should be stored.
Revision 2.4 TERIDIAN Proprietary 37 of 137
© Copyright 2005-2006 TERIDIAN Semiconductor Corporation