Maxim Integrated 71M6513H Power Meter IC Family Software - Manual (Page 38)

71M651x Software User’s Guide
4.7.3. Manually Controlling the Keil Compiler Settings
If the method described in section “Adjusting the Keil Compiler Settings” is not followed, the Keil compiler settings can
also be controlled manually.
The target options should be selected in order to adapt the compiler controls properly to the target. The uVision
compiler environment is started by selecting Programs  Keil  uVision2. uVision should start up and present the
following window:
Under Project  Options for Target1, select the Device tab and check the selected device. Newer versions of the Keil
Compiler offer selection of TERIDIAN (labeled “TDK”) 71M6511 and 71M6513 devices:
Revision 2.4 TERIDIAN Proprietary 38 of 137
© Copyright 2005-2006 TERIDIAN Semiconductor Corporation