Irrch, F f~ c h, Toshiba – Toshiba VF-SX User Manual
Page 95: Output frequency [when [rch] = 0)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10-8
TOSHIBA
The speed reached detection range
irrCH]
can be set between 0 Hz and the
maximum frequency, with a tolerance of 0.1 HZ.
The speed reached set frequency
[F f~ C H]
can be set between 0 Hz and the
maximum frequency.
An example of these parameters is shown in Figure 10.3
Output
Frequency
[when [rCH] = 0)
Figure 10.3 Examples of Low Speed Signal Operation
and Speed-Reached Signal Operation
The "speed reached’ signal is also output when any of the seven
"multispeed" frequencies is reached. See Section 10.10 of this chapter.
The low speed signal will turn OFF when a DC injection braking signal Is
applied during decelerating stop.