Toshiba VF-SX - Manual (Page 53)

8-8 TOSHIBA
TABLE 8-Z: SAMPLE OF TRIP OCCURRENCE
1 Key
1 Guide
Display Explanati on I
0C3
Drive Mode (flashing display). Motor coasts. I
s
: 50.0 Operating frequency during trip.
0
: Fr F
Operation direction during trip.
0
: 60.0 Operating frequency command value during trip.
0
: C ISO
Load current during trip, in %.
[V]
■.S 100
Input voltage during trip (* of 200 VAC)
0
: P 90
Output voltage during trip.
0
I I M i l
Input terminal status during trip. (See
Appendix).
11
. I I
Output terminal status during trip. (See I
Appendix). 1
Use of the
or scroll
key at any time will allow review of the previous item or value,
"upward" through these values in the opposite direction.
8.2.2 Monitor Mode
The Monitor Mode allows a user to examine the status of several key operating
conditions of the drive. These conditions are listed in Table 8-3. Consult the
Appendix in the back of this manual as well, for an Interpretation of the input
and output terminal Information.
S
This mode is activated by depressing the LIIll key, when running in the Drive
Mode. To return to the Drive Mode press the key again. To go to the
Programming Mode press the 0 key.