5 setting of standard parameter groups ifjp, 5 setting of standard parameter groups [ t, Output – Toshiba VF-SX User Manual
Page 84: Frequency, Toshiba, Ah9-p
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
9-19
Output
AH9-P
Frequency
9.5 Setting of Standard Parameter Groups
I f J P ]
Certain standard parameter groups can be set automatically by the use of the
[tyP]
function. In addition, the drive can be reset to all the standard
factory settings via the same command. These standard settings can only be
changed when the drive is not running. The procedure for entering these settings
into memory is shown below.
NOTE: When
[ t ^ P ]
is set to /
o r P
only the maximum frequency [FH],
base frequency
], upper limit frequency [
U L h
and point 2 output
frequency [
F - P P
] will be changed.