3 torque boost [ub, 3 torque boost [ub] -7, L“°"l – Toshiba VF-SX User Manual
Page 72: Eeei, Toshiba
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
9-7
Other inodes can be accessed at any time by pressing
l“°"l
or
EEEI
at any time
In the sequence above, but 1f the ¡E3 key Is not pressed the data changed in
the above sequence Is not stored in memory. If power Is then turned OFF the
parameter will return to the former setting. ALWAYS press the
a new setting in memory.
key to store
9.1.3 Torque Boost [ub]
Adjust the torque boost to Increase the startup torque. The torque boost value
[Ub ] can be set from 0* to 30* of the rated output voltage.
Output
Voltage
Figure 9.3 Setting to Increase Start-up Torque
Note that an overcurrent trip may occur at startup if the torque boost
value Is set too high.