Carrier 19XL - Manual (Page 65)

few seconds in order to see a value change, especially on kilopascal values.
To Remove an Override
1. On the Point Status table press NEXT or PREVIOUS to highlight the desired point.
2. Press SELECT to access the highlighted point.
3. Press RELEASE to remove the override and return the point to the PIC’s automatic control.
Override Indication
An override value is indicated by ‘‘SUPVSR,’’ ‘‘SERVC,’’ or ‘‘BEST’’ flashing next to the point
value on the Status table.
NEXT PREVIOUS SELECT EXIT
NEXT PREVIOUS SELECT EXIT
INCREASE DECREASE RELEASE ENTER