Carrier 19XL - Manual (Page 155)

Input Time and Date
Access the Time and Date table on the Service menu. Input the present time of day, date,
and day of the week. ‘‘Holiday Today’’ should only be configured to ‘‘Yes’’ if the present day is a
holiday.
Change Lid Configuration If Necessary
The LID Configuration screen is used to view or modify the LID CCN address, change to
English or SI units, and to change the password. If there is more than one machine at the job-
site, change the LID address on each machine so that each machine has its own address. Note
and record the new address. Change the screen to SI units as required, and change the
password if desired.
Modify Controller Identification If Necessary
The controller identification screen is used to change the PSIO module address. Change this
address for each machine if there is more than one machine at the jobsite. Write the new
address on the PSIO module for future reference.
Change the LID address if there is more than one machine on the jobsite. Access the LID
configuration screen to view or modify this address.
Input Equipment Service Parameters If Necessary
The Equipment Service table has three service tables: Service1, Service2, and Service3.