Carrier 19XL - Manual (Page 284)

Table 10B — Timing Out or Timed Out
Primary Message Secondary Message Probable Cause/Remedy
Ready To Start In XX Min Unoccupied Mode Time schedule for PIC is unoccupied. Machines will start
only when occupied.
Ready To Start In XX Min Remote Contacts Open Remote contacts have stopped machine. Close contacts to
start.
Ready To Start In XX Min Stop Command In
Effect Chiller START/STOP on Status01 manually forced to stop.
Release value to start.
Ready To Start In XX Min Recycle Restart Pend-
ing Machine in recycle mode.
Ready To Start Unoccupied Mode Time schedule for PIC is UNOCCUPIED. Machine will start
when occupied. Make sure the time and date have been
set on the Service menu.
Ready To Start Remote Contacts Open Remote contacts have stopped machine. Close contacts to
start.
Ready To Start Stop Command In
Effect Chiller START/STOP on Status01 manually forced to stop.
Release value to start.
Ready To Start In XX Min Remote Contacts
Closed Machine timer counting down unit. Ready for start.
Ready To Start In XX Min Occupied Mode Machine timer counting down unit. Ready for start.
Ready To Start Remote Contacts
Closed Machine timers complete, unit start will commence.
Ready To Start Occupied Mode Machine timers complete, unit start will commence.
Startup Inhibited Loadshed In Effect CCN loadshed module commanding chiller to stop.
Ready To Start In XX Min Start Command In
Effect Chiller START/STOP on Status01 has been manually
forced to start. Machine will start regardless of time sched-
ule or remote contact status.