Dell PowerVault DP600 - Manual (Page 37)

About Your System
37
Diskette drive n
seek failure
Incorrect configuration
settings in the System
Setup program. Run the System Setup
program to correct the
settings. See "Using the
System Setup Program" on
page 47.
Faulty or improperly
installed diskette drive. Replace the diskette. If the
problem persists, see
"Troubleshooting a
Diskette Drive" on
page 160.
Loose diskette drive
interface cable, or loose
power cable. Reseat diskette drive
interface cable, or power
cable. See "Troubleshooting
a Diskette Drive" on
page 160.
Diskette read
failure
Faulty or improperly
inserted diskette. Replace the diskette. If the
problem persists, see
"Troubleshooting a
Diskette Drive" on
page 160.
Diskette subsystem
reset failed
Faulty or improperly
installed diskette. Replace the diskette. If the
problem persists, see
"Troubleshooting a
Diskette Drive" on
page 160.
Drive not ready Diskette missing from or
improperly inserted in
diskette drive. Replace the diskette. If the
problem persists, see
"Troubleshooting a
Diskette Drive" on
page 160.
Table 1-7. System Messages (continued)
Message Causes Corrective Actions
book.book Page 37 Monday, September 14, 2009 1:53 PM