Dell PowerVault DP600 - Manual (Page 143)

Installing System Components
143
6 Attach the cables from the power distribution board to the system board.
7 Attach the cables from the power distribution board to the SAS backplane
board.
8 Reconnect all cables from the system board to the SAS backplane board,
the control panel, and any tape or hard drives in the peripheral or flex bays.
9 Close the system. See "Closing the System" on page 68.
10 Reinsert the power supplies. See "Installing a Power Supply" on page 80.
11 Reconnect the system to the peripherals and electrical outlet, and turn on
the system.
book.book Page 143 Monday, September 14, 2009 1:53 PM