Dell PowerVault DP600 - Manual (Page 99)

Installing System Components
99
Installing the Diskette Drive Into the Drive Carrier
Place the diskette drive into the drive carrier with the connectors toward the
back, align the screw holes, and secure with the three Phillips screws. See
Figure 3-18.
Figure 3-18. Installing the Diskette Drive Into the Drive Carrier
Installing the Diskette Drive
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Remove the front bezel, if attached. See "Removing the Bezel" on page 64.
3 Open the system. See "Opening the System" on page 67.
1 screws (3) 2 diskette drive carrier
3 plastic latch 4 diskette drive
4
1
3
2
book.book Page 99 Monday, September 14, 2009 1:53 PM