Dell PowerVault DP600 - Manual (Page 15)

About Your System
15
Table 1-2. Front-Panel Components
Item Component Icon Description
1 Power-on indicator,
power button The power-on indicator lights when
the system power is on.
The power button controls the DC
power supply output to the system.
NOTE:
If you turn off the system using
the power button and the system is
running an ACPI-compliant operating
system, the system performs a graceful
shutdown before the power is turned
off. If the system is not running an ACPI-
compliant operating system, the power
is turned off immediately after the
power button is pressed.
2 NMI button Used to troubleshoot software and
device driver errors when using certain
operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do
so by qualified support personnel or by
the operating system's documentation.
3 System identification
button The identification buttons on the
front and back panels can be used to
locate a particular system within a
rack. When one of these buttons is
pushed, the LCD panel on the front
and the blue system status indicator
on the back blink until one of the
buttons is pushed again.
book.book Page 15 Monday, September 14, 2009 1:53 PM