Dell PowerVault DP600 - Manual (Page 140)

140
Installing System Components
9 Reinstall the SAS controller daughter card. See "SAS Controller
Daughter Card" on page 126.
10 If a RAC card is present, attach the cables to the RAC connectors on the
system board. See "Installing a RAC Card" on page 114.
11 Reinstall the center and rear fan brackets. See "Replacing the Center Fan
Bracket" on page 106 and "Replacing the Back Fan Bracket" on page 106.
12 Install the memory cooling shroud. See "Installing the Cooling Shroud"
on page 105.
NOTICE:
Never operate your system with the memory cooling shroud removed.
Overheating of the system can develop quickly resulting in a shutdown of the
system and the loss of data.
13 Install all of the cooling fans. See "Removing and Installing a Fan" on
page 83
14 Reconnect all cables to the expansion cards.
15 Close the system. See "Closing the System" on page 68.
16 Reconnect all cables to the front and rear of the system.
17 Reconnect the system to the power source and turn on the system and
attached peripherals.
18 Replace the front bezel, if removed.
book.book Page 140 Monday, September 14, 2009 1:53 PM