Dell PowerVault DP600 - Manual (Page 22)

22
About Your System
LCD Status Messages
The system's control panel LCD provides status messages to signify when the
system is operating correctly or when the system needs attention. The LCD
lights blue to indicate a normal operating condition and lights amber to
indicate an error condition. The LCD scrolls a message that includes a status
code followed by descriptive text.
Table 1-6 lists the LCD status messages that can occur and the probable
cause for each message. The LCD messages refer to events recorded in the
system event log (SEL). For information on the SEL and configuring system
management settings, see the systems management software documentation.
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
NOTE:
If your system fails to boot, press the System ID button for at least five
seconds until an error code appears on the LCD. Record the code, then see
"Getting Help" on page 185.
Table 1-5. NIC Indicator Codes
Indicator Indicator Code
Link and activity indicators
are off The NIC is not connected to the network.
Link indicator is green The NIC is connected to a valid link partner on
the network.
Activity indicator is amber
blinking Network data is being sent or received.
book.book Page 22 Monday, September 14, 2009 1:53 PM